The enclosure comes with an external mounted 80A SSR heat sink. The heat sink mounting of the original design involves several steps of preparation to fit properly. We made a larger heat sink with a clean look. It offers three sets of mounting holes for the SSR.
The dimension for the heat sink is 138mm x 260mm x 30mm (5.5" x 10.0" x 1.5). The original beige colored paint is much more difficult to paint than the black color. Any imperfection of the top paint, or small scratch by the normal use will expose the base color.So, we changed the base paint to a strong and durable industrial flat textured black finish (black base paint). It makes the final finish paint easier, or you can use it without any prior painting.
The box is made from 0.060 (1.5 mm) thick steel. The mounting holes for the two chromed handles are not drilled because some customer may not use them. The door comes with a lock and key. The hinges of the door are removable.It can be installed on either right or left side. Gasket, plugs and hangers are provided. The enclosure is designed to be mounted on a wall. You can directly mount it with screws or hang it on the wall with the hangers.
Small screw holes for socket mounting were not tapped, but left for the user to drill, so that the mounting orientation and screw type option will be more flexible during the installation. The opening for XLR connector is about 22mm. For front/bottom panel precut dimensions, please check theelectricbreweryDotCom. This panel is for 30A. The item "Wall-mount Enclosure for Electric Brewery Panel, Black, 16x16x8, 80A heat sink" is in sale since Tuesday, March 14, 2017.This item is in the category "Business & Industrial\Electrical Equipment & Supplies\Electrical Boxes, Panels & Boards\Electrical Boxes & Enclosures". The seller is "auberinstruments" and is located in Alpharetta, Georgia. This item can be shipped worldwide.